Sink. Friday , May 04th , 2018 - 18:03:55 PM
Before starling any plumbing work, make sure the new basin or sink fits properly. Prepare the mountings: for example, fix wall brackets, check the position of a pedestal and drill fixing holes, check the positioning of a sink unit and cut any necessary holes in it for pipes.
If you are replacing an old sink or basin with a new one, it is usually much easier to saw off the old supply and waste pipes and the screws securing the fitting rather than trying to undo them. Loosening old, corroded fittings is at best frustrating and often impossible. Cut the pipes where they are easy to get at both at this stage and later when the new basin is installed. When the old fitting is off the wall, the taps can usually be removed comparatively easily if you want to use them again.
With a pedestal wash basin, a common dodge is to cross the supply pipes over behind the pedestal - the pipes stay relatively well hidden, and there are not too many tight bends in the pipes.
Any content, trademark’s, or other material that might be found on the Z Pics website that is not Z Pics’s property remains the copyright of its respective owner/s. In no way does Z Pics claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.