Sink. Sunday , April 29th , 2018 - 11:28:51 AM
Both pedestal and wall-hung basins need to be securely fixed to the wall: fit battens on stud partition walls.
Before fixing the new unit into place, do as much plumbing work to it as possible, first, fix the waste outlet. Ceramic wash basins usually have an overflow build in, and a slotted waste outlet has to be used. To seal this to the basin surface, bed it in using plumbing mastic. Position the waste outlet so that the slot in it coincides with the slot from the overflow in the basin and hold in it place with the washers and back-nut supplied. Do not overtighten or the basin may crack. Remove any excess mastic.
Do ensure the sink is sitting the correct position. Insert the wing nuts into the available screw heads: After the undermount sink has been clamped, insert the wing nuts into the available screw heads. When the screw nuts are inserted, ensure they are tight, if they are not tight, you can tighten them with your hands.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Z Pics claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.